3-in-1 Face & Neck LED Mask

A two-piece set that treats the face and the neck in the same session — the area most home masks leave out. Both pieces are moulded from soft, food-grade silicone with no pungent smell, so they drape against the skin instead of sitting rigid against it, and both run cordless off a single 4000mAh controller.

Each of the 234 chips is a three-in-one emitter carrying 630nm red, 415nm blue and 830nm near-infrared in one package, which keeps the light even across the whole surface rather than clustered in spots.

The LCD remote gives you six light modes, brightness in 10% steps, a timer up to 30 minutes, and an adjustable pulse frequency. Battery level is shown on the screen at a glance.

1. Clean your face and neck and dry the skin with a soft towel.
2. Connect the mask and the neck piece to the controller with the supplied cable.
3. Fit the silicone eye protectors, then position the mask and neck piece and secure the straps.
4. Press the power button to turn the device on.
5. Press Mode to choose from the six light modes: red, blue, near-infrared, red + blue, red + near-infrared, or all.
6. Set the timer, then set brightness from 0–100% in 10% steps.
7. Lie back and relax for the session. Do not stare directly at the light.
8. After the session, wipe the pieces clean so they are ready for next time.

Recommended use

• 15–30 minutes per session is the usual range.
• Apply a serum or lotion first if you want — the mask works well over a sheet mask or essence.
• The elastic straps can be washed; the silicone pieces should only be wiped.

Charging

• Charge the controller through its Micro-USB port using a 5V 1A adapter, or from a power bank.
• Charge when the battery icon drops below 20%.
• Do not use the mask while it is charging.
• The controller switches off automatically when the battery is depleted.

Cleaning

Wipe the silicone with a damp cloth. Do not soak the mask in water and do not use corrosive solvents. Keep it out of direct sunlight.

• LED count: 234 total — 114 face, 120 neck
• Wavelengths: 3-in-1 chip at 415nm, 630nm and 830nm
• Modes: Six — red, blue, near-infrared, red + blue, red + near-infrared, all
• Brightness: 0–100%, adjustable in 10% steps
• Pulse frequency: 0–10,000Hz
• Timer: 1–30 minutes
• Battery: 4000mAh
• Charging interface: Micro USB, 5V 1A
• Charging time: 40 minutes
• Power: Max 7W
• Size: Face 32 × 21.3 cm, neck 31 × 22.9 cm
• Weight: 404 g
• Material: Food-grade silicone
• Colour: White
• Certification: CE, FCC, RoHS

• Light therapy face mask
• Light therapy neck piece
• Remote control
• Velcro straps — 1 pair for the mask, 1 for the neck
• Micro-USB charging cable
• Silicone eye protectors (2 pairs)
• Drawstring bag
• User manual

This is a general wellness device, not a medical one. Read the included manual before first use.

Do not use if you

• Are pregnant
• Have epilepsy
• Have a thyroid condition or take thyroid medication
• Take photosensitising medication
• Have broken skin, an open wound or a skin injury on the treatment area

Children should not use the device. If you have a medical condition, or are unsure whether the device is suitable for you, speak to a qualified healthcare professional before use.

General precautions

• Do not look directly at the light. Keep your eyes closed and use the supplied eye protectors.
• Because the mask is made of silicone, a faint odour when you first open the package is normal and fades.
• There are circuits and LEDs inside the mask — do not squeeze, fold or press it.
• Do not soak the mask in water and do not scrub it with corrosive solvents.
• Keep it out of direct sunlight.
• Stop using the device if you notice irritation and ask a doctor.